Sealed system5 photos
Viking 48" Panel-Ready Side-by-Side
Stopped cooling. Both compartments drifting warm.
4 components
Columns · Same-day service
Built-in 18, 24, 30 and 36 inch columns, all-refrigerator and all-freezer, panel-ready doors included. Warm cabinets, frost buildup, ice maker faults and door alignment. Firm price before we start, up to 1 year warranty in writing.
What we service
Every Viking unit in your kitchen: built-in, freestanding and panel-ready.
Refrigeration
Cooking & Ventilation
Kitchen & Outdoor
"Fixed our dishwasher quickly and the technician was so nice and communicative. Easy to get someone to the house even on the weekend."
Josephine N. · Google
"He was quick and explained very thoroughly what was going on with my refrigerator. The price you can't beat. Thank you!"
Monique D. · Yelp
"Mark figured out the issue with the ice and water dispenser, ordered the parts and fixed everything. Very knowledgeable."
Neeraj B. · Google
"Our Viking fridge stopped cooling on a Saturday. They came the same afternoon and had it running before dinner."
Kiera G. · Google
Why us
We work on Viking every day, stock the parts that commonly fail, and name the price before we start.
Columns are one of the units we open most. Our techs know the failure patterns before the panel is off.
Dampers, evaporator and condenser fan motors, defrost heaters, inlet valves and gaskets ride with the technician.
The technician diagnoses on site and gives you a firm price. You decide before any work begins.
Parts and labor, in writing. If the same fault comes back inside the window, we return at no charge.
Call before noon and we'll do our best to be there today, weekends included.
A full-height column comes out and goes back without marking your cabinetry.
Prefer not to call? Book your visit online — we reply within 30 minutes.
Our work
Real units from the last few weeks.
Sealed system5 photos
Stopped cooling. Both compartments drifting warm.
4 components
Control boards2 photos
Running erratically, temperatures unstable.
2 boards
Ice maker3 photos
Ice maker had stopped filling the bin.
2 components
Sealed system6 photos
Stopped cooling. The system had lost its charge.
2 components
Freezer door5 photos
Freezer door no longer sealing or operating.
1 component
Fan motor3 photos
Running loud and not reaching temperature.
1 component
Ice maker4 photos
No ice, and the freezer section frosted over.
1 assembly
Door hinge2 photos
Right door dropping and no longer closing square.
1 mechanism
Defrost2 photos
Frost building up, water collecting inside.
Service, no parts
Control board1 photo
Not holding temperature, door no longer sealing.
2 components
Sealed system1 photo
Stopped cooling, neither door sealing.
3 components
Common faults
A column is a single-purpose cabinet with its own sealed system behind a full-height custom panel. Most calls on these units come down to the defrost circuit, the fans, or the hardware carrying that panel.
One cabinet, one evaporator, nothing to borrow cold from. A warm column points at the evaporator fan, a defrost circuit that stopped clearing ice off the coil, or a sealed system that has lost charge.
Defrost heater, defrost thermostat or the drain line frozen shut. Frost on the back wall points at defrost; frost near the opening points at the gasket.
Fill tube, mold heater or ejector motor. On columns the fill tube frosts over first, and the unit keeps cycling without ever dropping a cube.
Refrigerator and freezer columns are two separate machines standing side by side. When only one drifts, the fault is inside that cabinet and nothing is shared with its neighbour.
Thermistors and the control board. A shorted sensor reports a temperature the cabinet never reached, and the board runs cooling and defrost off that reading.
On built-ins the condenser sits behind the top grille and packs with dust. A blocked coil or a stopped condenser fan makes the compressor run without ever reaching temperature.
A full-height door carrying a custom panel is heavy. Hinges and closers wear, the door stops pulling shut on its own, and the seal goes with it.
Usually the defrost drain tube frozen at the base of the cabinet, or the water line fitting behind the unit. Both look the same from the kitchen floor.
Bundle and save
While the technician is already at your home. Mention every unit you want checked when you book.
Call (888) 000-0000 Book onlineCoverage
Every metro has its own Viking technicians and its own local number. Pick yours for local coverage, neighborhoods and same-day availability.
Don't see your city? Call (888) 000-0000 — we cover more than the metros listed here.
Questions
Answered by our dispatch team.
A refrigerator column and a freezer column are two separate machines, each with its own sealed system. When only one goes warm the fault is inside that cabinet: usually the evaporator fan, a defrost circuit that stopped running, or a system that has lost charge. The other column keeps working because nothing is shared between them.
Frost that returns points at the defrost circuit: the heater, the thermostat, or the sensor that tells the board when to run it. Frost only near the opening is a different fault, the gasket or a door that stopped pulling itself shut.
Yes, including panel-ready doors. The unit is pulled from the cabinetry and reset without marking the millwork, and the panel alignment is set back the way it was.
It depends on the fault and whether the part is on the truck. Fans, heaters, thermistors and gaskets are common enough that we carry them. Anything model-specific is ordered against the serial number, and you get the timing in writing with the quote.
We use OEM parts identified by the serial number on your unit. Viking revised components across model years, so the model name alone is not enough to order the right one.
Usually yes on a built-in. A replacement means the cabinetry opening, the panels and the water line all have to work with the new unit, which turns a repair into a kitchen job. If we think yours is past sensible repair, the technician will say so on site.
No. Leave it as it is. If the technician needs a shelf cleared to reach the evaporator, he will say so on site and it takes a few minutes. Only pull the unit out of the cabinetry yourself if you are certain the flooring can take it.
Still have a question? Call (888) 000-0000 or book online.
Book now
Tell us what's wrong and we'll call you back to confirm a time. Same-day slots available in every metro we cover.
Independent repair of Viking and other high-end kitchen appliances.
(888) 000-0000Independent appliance repair company, not affiliated with, authorized by, or endorsed by Viking Range, LLC.